Water Control Valve

Water control valves are vital components in firefighting sprinkler systems. The valves control the water flow throughout the whole system and allow or disallow water to certain areas. Our line of water control valves includes our gate valves, butterfly valves, alarm check valves, deluge valves, etc. Material: ductile iron

    1. UL FM Flanged-end Swing Check Valve

      Connection Ends: ASME B16.1 Class 125
      Working Pressure: 200PSI, 250PSI, 300PSI are available upon request
      Fusion Bonded Epoxy Coating in accordance with ANSI/AWWA C550

    1. UL FM Grooved End Swing Check Valve

      The swing check valve can be installed horizontally and vertically. 2. The inside of the valve has little resistance to the fluid. 3. It is sealed by non-stick EPDM.

    1. UL FM Flanged X Grooved-End Gate Valve

      Bolted Bonnet. Non-Rising Stem. Resilient Wedge
      300PSI/20.7 Bar Non-Shock Cold Working Pressure
      Conforms to AWWA C509
      FBE Coated Interior and Exterior

    1. UL FM Flanged-End Gate Valve

      Bolted Bonnet. Outside Screw and Yoke. Resilient Wedge
      300PSI/20.7 Bar Non-Shock Cold Working Pressure
      Maximum Operating Temperature 185℉/85℃
      Flange: ANSI Class 125/150,other flange dimensions are available

    1. UL FM Grooved-End Gate Valve

      Bolted Bonnet. Outside Screw and Yoke. Resilient Wedge
      FBE Coated Interior and Exterior
      Maximum Operating Temperature 185℉/85℃
      FM Approved & UL/ULC Listed

    1. UL FM Gate Valve without Handwheel

      300PSI/20.7 Bar Non-Shock Cold Working Pressure
      Conforms to AWWA C509
      FBE Coated Interior and Exterior
      Maximum Operating Temperature 185℉/85℃

    1. UL FM Indicator Post

      The UL FM indicator post is designed for use with NRS gate valves,FM Approved&UL Listed ,Two types can be choose: Wall pe post and Adjustable upright post,Other sizes are available upon request.Material: ductile iron

    1. UL Y-Strainer

      Installed before the relief valves, as well as other equipment, UL Y-Strainers serve to filter out the impurities in the flow medium for protection of valves and equipment in the sprinkler system.

    1. Pressure Reducing Valve

      Pressure reducing valves are diaphragm type control valves driven by the pressure within the sprinkler system. The function of the valve is to reduce the high pressure buildup and maintain a set pressure range.

    1. Foot Valve

      Material: Cast Iron Ductile Iron
      ASTM Spec: A126 Class B A536 65-45-12